Interlogix Advisor Advanced ATS1000A-MM - Page 115

Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 105
Note: This menu is only available for a wireless expander ATS1235 with
firmware version 1.13 or newer, which is online.
4.1.n.7.1 Sensor ID
1>Sensor ID
10EBA9E
The screen allows you to view the sensor ID.
Note: First two digits of the sensor identifier also define the sensor type. See
Table 27 below.
4.1.n.7.2 Sensor type
2>Sensor type
DWS
The screen allows you to view the sensor type. The following sensor types are
available:
Table 27: Wireless sensor types
Type
Description
ID
Repeater
Wireless signal repeater
0A*
CO
Carbon monoxide sensor
0D*
DWS
Door/Window sensor
10*
Smoke sensor
Smoke sensor
11*
PIR
Passive infrared detector
12*
2 button panic
2 button panic sensor
14*
Shock sensor
Shock sensor
18*
Sound sensor
Glass break sound sensor
1A*
PIR camera sensor
Wireless PIR camera
23*
4.1.n.7.3 Supervision
3 Supervision
>Off<
Enables or disables the wireless device supervision. Supervision of all types
becomes active. See “2.2.2.n.4.4 Supervision” on page 77 for more details.
4.1.n.7.4 Sensor opt
4 Sensor opt
>Ignore alarm<
Sensor options depend on the type of the wireless device.
See an appropriate RF device manual for more information on available options.
The following options may be available.