112 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
4.3.n.6 Max pics 24h
6 Max pics 24h
>Infinity<
Maximum picture number defines how many pictures can be taken by the
camera during 24 hours period of set or unset state.
The counter is reset when the area changes its set state.
The allowed range is 1 to 999, or 0 (infinity), which means unlimited number of
pictures.
If the limit is reached, the camera switches off and an appropriate event is
recorded in the log.
4.3.n.7 Remote pics
If remote picture triggering is enabled, you can take a picture remotely, using
configuration software.
4.3.n.8 Test pic to CS
The command allows you to take picture and send it to a selected central station.
Choose a central station to send the picture.
Calling CS 1...
Transmitting
The current picture transmission status is shown in the bottom line of the screen.
To Next Page
Loading...
