34 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
2. Program up/download facilities using menu “9.4 PC connection” (see
page 188).
3. Program necessary condition filters using menu “6.1 Condition filters” (see
page 117).
4. When outputs are used, program menu “6 Outputs and filters” (see
page 116).
5. Program the custom LCD text in menu “8.3.2 Custom message” (see
page 147).
6. Program shock sensors using menu “4.1.n.7 Gross and Pulse options” (see
page 104).
7. Program schedules and actions for them using menu “7 Calendar” on page
127.
8. Program function keys in “2.2.1.n.3.10 Function keys” on page 72.
9. Program wireless devices. See “Wireless device programming” on page 197
for details.
10. Program PIR cameras. See “Using cameras” on page 203 for details.
Test menus
After programming, the system has to be tested. Menus providing support in
testing are:
Table 10: User menus with test options
View and inhibit / uninhibit any zone
View and isolate / de-isolate any zone
Lists all events that occurred
Provides system information, including open zones
Provides walk test and test call
Table 11: Installer menus with test options
Lists all events that occurred
Lists all active zones, tampers and faults
Perform various tests and diagnostics
Allows reinstalling the system
Lists all keypads and expanders and their current statuses
Isolates / de-isolates zones
Allows you to ping the selected central station or PC
To Next Page
Loading...
Need help?
General
