196 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
Autoset
The Advisor Advanced system allows autoset configuration. The system can be
set automatically via schedule.
The following options must be considered when providing an autoset facility.
• Using menu “7.2 Actions” on page 129, create an action with Set function.
See also “User programmable functions” on page 193.
• Configure an appropriate schedule as described in menu “7.5 Schedules” on
page 136 and make sure it is active.
• Enable or disable “5.n.9 Silent set” option on page 115.
• If necessary, set “5.n.8 Autoset retry” option on page 115.
If Set retry is allowed, configure “8.4.7 AS user retry” on page 151.
• Set “5.n.4 Warning time” option on page 114 as well.
• Optionally, configure “8.4.6 AS fault retry” option on page 151.
To Next Page
Loading...
