Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 189
9.4.1.n.2 Transm path
The Transmission path option defines which communication path is used to
establish the selected PC connection.
Note: The next options in this menu differ for specific transmission paths. The
text in square brackets identifies the transmission path that the option is
applicable to.
9.4.1.n.4 Phone number
The Phone number menu defines the Up/Download telephone number 1. The
phone number can contain up to 20 digits. The following special characters are
available:
• P: Pause (3 s).
• T: Waiting for dial tone.
Note: To enter a character, press the corresponding key twice.
9.4.1.n.5 Retry limit
The Retry limit option defines a maximum number of connection attempts. The
allowed range is between 0 and 250. The retry counter is reset after each
successful connection or any incoming call.
9.4.1.n.6 Delete PC conn
To remove a PC connection, select a PC connection using the cursor, or by
entering the PC connection number, and go to the Delete PC conn menu.
The display shows:
6 Delete PC conn
>Cancel<
Choose Ok and press Enter. This removes the PC connection.
Repeat the command to delete other PC connections, or press Clear to exit and
return to the higher menu level.
Note: You cannot delete a PC connection unless your user group authorizes you
to do so.
To Next Page
Loading...
