Interlogix Concord 4 User Manual

Concord 4 User Manual 79
Feature
My system features
Keyswitch arming
 Yes. I can use a key to arm the system. The switch is
located:
____________________________________________
_____
 No.
System information
Table 20 below shows system information.
Table 20: System information
System information
Code
Factory code
System number
System level
Software version
If the power goes out
Your system has a backup battery that keeps your system operational during a
power failure. An optional feature allows your system to alert the central
monitoring station if the power is off for 15 to 45 minutes. It reports again when
power has been restored.
No activity time
Table 21 below shows the no activity time for each partition (default time is 24
hours).
Table 21: No activity time
Partition
No activity features
1
 Yes. A report will be sent if there is no activity in my system for _____
hours (1 to 42).
 No. My system does not use this feature.
2
 Yes. A report will be sent if there is no activity in my system for _____
hours (1 to 42).
 No. My system does not use this feature.
3
 Yes. A report will be sent if there is no activity in my system for _____
hours (1 to 42).
 No. My system does not use this feature.

Interlogix Concord 4 Specifications

General

Brand	Interlogix
Model	Concord 4
Category	Security System
Language	English