Interlogix PIR - Camera Diagnostics; RF Signal and Range Tests

16 PIR Camera Reference Manual
Camera diagnostics
The following menus are available for camera diagnostics:
• RF signal diagnostics. See “1.2.1.3 RF RSSI test” below.
• Camera range test. See “1.2.1.5 Camera range test” below.
1.2.1.3 RF RSSI test
1>Expander 1
2 Expander 5
Select the input location first.
Enter the physical input number on this location. The screen shows LDR data. .
Zone 1
-44dBm [IIII ]
Press Right to toggle between LDR and HDR receiver data, or wait 2 seconds for
the screen to scroll automatically.
Zone 1
QI=50% [III ]
For more information on the communication quality, refer to the appropriate
wireless expander manual.
1.2.1.5 Camera range test
17 Camera 17
18 Camera 18
Range test allows you to verify wireless PIR camera signal reception.
Select a camera to activate range test.
Camera 17
In range test
In this mode, selected wireless PIR cameras show the reception quality with
alarm LED colour:
• Green: Good signal
• Orange: Medium signal
• Red: Weak signal
The LED follows the weakest communication link of LDR and HDR.
For more information on the communication quality, refer to the appropriate
wireless PIR camera expander manual.
Walk test
During walk test wireless PIR camera indicator performs the following functions:
• PIR activation results in 3 seconds red indication.
• Trouble results in 3 seconds orange indication.