EasyManuals Logo

Interlogix SDX-135Z User Manual

Interlogix SDX-135Z
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
P/N 466-5308 • REV A • ISS 09MAY17 ©2017 United Technologies Corporation
1. Smoke Alarm: What To Do When the Alarm Sounds
Smoke alarm pattern is three long beeps, a 1.5 second pause, and three long beeps repeating.
The red LED blinks in time with alarm pattern.
Alert small children in the home as well as anyone else that might have difficulty recognizing the
importance of the alarm sounding or that might have difficulty leaving the area without help.
Leave immediately by your escape plan. Every second counts, so don’t waste time getting dressed or
picking up valuables.
In leaving, don’t open any inside door without first feeling its surface. If hot, or if you see smoke seeping
through cracks, don’t open that door! Instead, use your alternate exit. If the inside of the door is cool,
place your shoulder against it, open it slightly and be ready to slam it shut if heat and smoke rush in.
If the escape route requires you to go through smoke, stay close to the floor where the air is cleaner.
Crawl if necessary, and breathe shallowly through a cloth, wet if possible.
Once outside, go to your selected meeting place and make sure everyone is there.
Call the fire department from your cell phone outside, or from your neighbor’s home-not from yours!
Don’t return to your home until the fire officials say that it is all right to do so.
There are situations where a smoke alarm may not be effective to protect against fire as stated in the
NFPA Standard 72. For instance:
a) smoking in bed
b) leaving children home alone
c) cleaning with flammable liquids, such as gasoline
NOTE: See Section RECOGNIZING NUISANCE ALARMS, for nuisance alarm situations.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Interlogix SDX-135Z and is the answer not in the manual?

Interlogix SDX-135Z Specifications

General IconGeneral
Bandwidth319.5 MHz
Detector typePhotoelectrical reflection detector
Mounting typeSurface-mounted
Product colorWhite
InterconnectableYes
Connectivity technologyWireless
Battery life10 year(s)
Battery typeBuilt-in battery
Power sourceBattery
Battery voltage3 V
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 37.8 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Height55.6 mm
Diameter142.3 mm

Related product manuals