8 TruVision Series 3 IP Camera FW3.1 Configuration Manual
3. Enter the password in the password field, and confirm it.
Note: A valid password range must be between 8 and 16 characters. You can
use a combination of numbers, lower and upper case letters, and special
characters : _ - , . * & @ / $ ? Space. The password must contain characters
from at least two of these groups. We also recommend that you reset your
password regularly. For high security systems, it is particularly recommended
to reset the password monthly or weekly for better protection.
4. Click OK to save the password.
A pop-up window confirms activation. If activation fails, confirm that the
password meets the requirement and try again.
5. Change the device IP address to the same subnet with your computer by
either modifying the IP address manually or checking the checkbox of Enable
DHCP.
6. Input the password and click the Save button to activate your IP address
modification.
To Next Page
Loading...
