14 TruVision Series 3 IP Camera FW3.1 Configuration Manual
2. From the Time Zone drop-down menu select the time zone that is the closest
to the camera’s location.
3. Under Time Sync, check one of the options for setting the time and date:
Synchronize with an NTP server: Check the NTP enable box and enter the
server NTP address. The time interval can be set from 1 to 10080 minutes.
- Or -
Set manually: Enable the Manual Time Sync. function and then click to
set the system time from the pop-up calendar.
Note: You can also check the Sync with computer time check box to
synchronize the time of the camera with the time of your computer.
4. Check Enable DST to enable the DST function, and set the date of the DST
period.
5. Click Save to save changes.
To Next Page
Loading...
