28 TruVision Series 3 IP Camera FW3.1 Configuration Manual
To define ROI parameters:
1. Click Configuration > Video/Audio > ROI.
2. Draw the region of interest on the image. It supports only one region.
3. Choose the stream type to set the ROI encoding.
4. Check the Fixed Region to manually configure the area. You can choose the
Image Quality Enhancing level for ROI encoding, and you can also name the
ROI area.
5. Click Save to save changes.
Dual-VCA (Video Content Analysis)
When Dual-VCA mode is enabled, the camera sends video analytics results
(metadata) to an NVR or other platforms to generate a VCA alarm.
For example, with an Interlogix NVR (please check the Interlogix website for the
latest NVR models supporting this feature) you can draw a virtual line in the NVR
playback window and search the objects or people crossing this virtual line.
Note: Only cross line and intrusion detection can support dual-VCA mode.
To define Dual-VCA parameters:
1. In the Video/Audio panel, click the Display Info. On Stream tab to open its
window.
2. Check the check box to enable Dual-VCA.
To Next Page
Loading...
