52 TruVision Series 3 IP Camera FW3.1 Configuration Manual
4. Select whether the recording will be for the whole week (All Day recording) or
for specific days of the week (Customize recording).
All Day recording: Select one of the record types to record from the drop-
down list box:
• Normal: This is continuous recording.
• Motion Detection: The video is recorded when the motion is detected.
• Alarm: The video is recorded when the alarm is triggered via the external
alarm input.
• Motion | Alarm: The video is recorded when the external alarm is
triggered or the motion is detected.
• Motion & Alarm: The video is recorded when motion and alarms are
triggered at the same time.
• Cross Line: Video is recorded when the pre-defined line on-screen in
crossed.
• Intrusion Detection: Video is recorded when an intrusion is detected.
- Or -
Customize recording: Click the day of the week required and then for period
1 set the start and end times during which you want the camera to begin and
end recording. From the drop-down list box, select one of the record types to
record. Repeat for additional periods in the day. Up to four time periods can
be selected.
Note: The eight time periods cannot overlap.
To Next Page
Loading...
