TruVision Series 3 IP Camera FW3.1 Configuration Manual 59
To restore default settings:
1. Click Configuration > System > Maintenance.
2. Click either Restore or Default. A window showing user authentication
appears.
3. Enter the admin password and click OK.
4. Click OK in the pop-up message box to confirm restoring operation.
Import/export a configuration file
The administrator can export and import configuration settings from the camera.
This is useful if you want to copy the configuration settings to a camera, or if you
want to make a backup of the settings.
To import/export configuration file:
1. Click Configuration > System > Maintenance.
2. Click Browse to select the local configuration file and then click Import to
start importing configuration file.
3. Click Export and set the saving path to save the configuration file.
Upgrade firmware
The camera firmware is stored in the flash memory. Use the upgrade function to
write the firmware file into the flash memory.
To Next Page
Loading...
