TruVision Series 3 IP Camera FW3.1 Configuration Manual 29
3. Click Save to save changes.
Video image
You may need to adjust the camera image depending on the camera model or
location background in order to get the best image quality. You can adjust the
brightness, contrast, saturation, hue, and sharpness of the video image.
Use this menu to also adjust camera behavior parameters such as exposure
time, iris mode, video standard, day/night mode, image flip, WDR, digital noise
reduction, and white balance. See Figure 6 and Table 6 below for more
information.
Figure 6: Camera image settings menu (Auto-switch option selected for Switch Day and
Night Settings)
Table 6: Image parameters
Parameter Description
1. Switch Day and Night Settings
Auto D/N Switch The camera automatically switches between day and night mode. All
image settings remain the same for both modes.
. Scheduled Switch The camera switches between the day and night modes according to
the schedule configured (see the figure below: Common, Day, and
Night tabs). The times shown for the Start of day settings and Start of
night settings are for Day mode. Night mode has another time period.
There are three tabs to configure the day/night settings:
Common: Both day and night mode settings are identical for Image
Adjustment (Saturation), Exposure (Iris Mode), Day/Night Switch,
Video Adjustment, and Other.
To Next Page
Loading...
