Interlogix TVD-5305 - Operating PTZ control

TruVision Series 3 IP Camera FW3.1 Configuration Manual 67
Log type
Description of events included
Operation
Power On, Unexpected Shutdown, Remote Reboot, Remote Login, Remote
Logout, Remote Configure parameters, Remote Upgrade, Remote Start
Record, Remote Stop Record, Remote PTZ control, Remote Initialize HDD,
Remote Playback by File, Remote Playback by Time,
Remote Export Config
file, Remote import config file, Remote Get Parameters, Remote Get
Working Status, Start Bidirectional Audio, Stop Bidirectional Audio, Remote
Alarm Arming, Remote Alarm Disarming
To search logs:
1. Click Log.
2. In the Major Type and Minor Type drop-down list, select the desired option.
3. Select start and end time of the log.
4. Click Search to start your search. The results appear in the left window.
Operating PTZ control
In the live view interface, you can use the PTZ control buttons to control
pan/tilt/zoom and other functions of the camera (where supported).
PTZ control panel
In live view, click / to display/hide the PTZ control panel.
Figure 20: PTZ control panel
Table 8: Description of the PTZ control panel
Description
1
.
Directional buttons: Controls the movements and directions of the PTZ. Center button is
used to start auto-pan by the PTZ dome camera.
2
. Zoom, focus and iris: Adjusts zoom, focus and iris.
3
. PTZ movement: Adjusts the speed of PTZ movement.
4
. Turns on/off the light. This function is supported by cameras with a RS-485 port.
5
. Turns on/off camera wiper. This function is supported by cameras with a RS-485 port.
6
. Auto focus