54 TruVision Series 3 IP Camera FW3.1 Configuration Manual
Camera management
This chapter describes how to use the camera once it is installed and configured.
The camera is accessed through a web browser.
User management
This section describes how to manage users. You can:
Add or delete users
Modify permission
Modify passwords
Only the administrator can manage users. The administrator can create up to 31
individual users for the cameras listed in this manual. For TruVision IP open
standard cameras, the administrator can create up to 15 individual users.
When new users are added to the list, the administrator can modify permissions
and password of each user. See Figure 15 below.
Figure 15: User management window
Passwords limit access to the camera and the same password can be used by
several users. When creating a new user, you must give the user a password.
There is no default password provided for all users. Users can modify their
passwords.
Note: Keep the admin password in a safe place. If you forget it, please contact
technical support.
Types of users
A user’s access privileges to the system are automatically defined by their user
type. There are three types of user:
To Next Page
Loading...
