Chapter 1
Programming
3
Menu navigation
We use the KTD-405 keypad controller (Figure 2) in this manual to explain the features of UltraView PTZ
because of the KTD-405’s ability to control all of the UltraView PTZ’s advanced features. (For detailed
keypad instructions, refer to the KTD-405/KTD-405A/KTD-405-2D Controller Keypad User Manual.)
Figure 2. Navigating with a KTD-405/405A/KTD-405-2D keypad
You can use multiple methods to navigate through the menu system with your keypad:
Joystick navigation. Use the keypad joystick to move through menu items. When you have the desired
menu item selected, move the joystick to the right to advance through the available options. Once you are
in a menu, move the joystick to the left to back out of that menu.
Button navigation. Use the pause button to scroll up; play to scroll down; fast forward or forward frame
for the next item; fast rewind or reverse frame for the previous item. When you have navigated to the item
you want, use seq, set, or fast forward to select that item. The arrow indicator on the UltraView PTZ menu
identifies the property that will be changed.
To change a setting, press the iris + button. The setting will be saved when you advance to the next menu.
Alternatively, you may be able to use the zoom + button to advance, depending on your protocol. (Use of
shortcuts on the KTD-405 keypad to navigate and select may not work with all protocols.)
Numerical navigation. Press the number associated with a menu item to select or highlight that option or
proceed to that menu. You will also use the number keys to enter numerical data, such as passwords.
Note: When you press the number associated with an option and there is a value to set, you will automatically be
asked to set that value. If there is no value to set, when you press the number associated with an option,
that option will be selected and you will proceed to the next menu.
CAMERA 22 MONITOR 2
ZONE 32 PARKING GARAGE
mon view zone
23
BC
1
A
45
6
D
E
789
esc
0
1ST
focus
auto
+
iris
-
+
zoom
+
focus
-
-
clear
set
dsr/vcr
seq
aux 1
alarm tour
aux 2 aux 3
store
aux 4
find
face badge over vol
vol
last
Shaded keys
appear on the
KTD-405A only
Previous
Scroll down
Scroll up
Next
Edit (turn
joystick
clockwise)
Previous
Numeric keys
Scroll down
Next
Scroll up
Select
Advance
Change setting
Select
To Next Page
Loading...
