UltraView PTZ
User Manual
22
Area and titles
To program a titled area, do the following:
3. Enter the preset number (000 to 128) of the preset title to
be edited. The Title entry menu displays (Figure 48).
4. You can move the display location for the title up and
down onscreen. To set the location, confirm that the
cursor (arrow) is under the preset number on the left. Use
the joystick to move the position of the title up and down.
The title cannot be moved from left to right.
5. To enter or edit the title, move the cursor to the right
(inside the parentheses). Use the joystick to scroll up and
down to the desired alphanumeric character.
Note: You cannot edit a preset title on a preset that is not
programmed.
Figure 48.Title entry menu
6. When the title is set, press the iris + button to return to
the Preset titles menu.
7. Repeat steps 4 through 7 for any additional titles, or press
iris - to return to the Edit Titles/Areas menu.
1. From the Program select menu, navigate to option 3 and
pan right. The Edit titles/areas menu displays (Figure 46
on page 21).
2. Navigate to option 2 and pan right. The Assigning area
titles menu displays (Figure 49).
Figure 49.Assigning area titles menu
To Next Page
Loading...
