Chapter 1
Programming
29
Preset tours
UltraView PTZ cameras have preset tour capability. A preset tour is composed of a group of preset positions
that the operator can program to be linked together in a sequence. Each tour consists of a string of up to 64
steps, or presets, which are programmed by the user.
To create a preset, do the following:
4. Select 4 to delete the tour (Figure 60). A Please wait
message displays.
5. Press iris - to exit back to the PTZ tour programming
menu.
6. Repeat steps 2 through 5 to delete any other ShadowTour.
Figure 60.Delete ShadowTour
1. Navigate to option 5 on the Program select menu and pan
right. The PTZ tour programming menu displays
(Figure 61).
Figure 61.PTZ tour programming for preset tours
2. Select the tour to be edited. The Tour programming
menus (Figure 62) display.
3. Navigate to option 1 and pan right to edit the tour.
Edit Tour (1)
Play Tour (2)
4. Navigate through and use iris + to set the preset,
position, dwell time, speed, zoom, and TTL (Figure 62 on
page 29).
Figure 62.Tour programming menus
To Next Page
Loading...
