UltraView PTZ
User Manual
26
Current status
To review the current settings for your PTZ camera, select option 4 (Current status) from the Program select
menu and pan right. UltraView PTZ cameras with preset and area features have status menus that show
programmed presets and programmed areas by putting an X next to them in the menu.
Figure 55 shows typical Setup status screens. Use the joystick to page up and down through the screens. To
return to the last status screen, press iris -. You cannot add/change settings from these status screens.
Figure 55. Status menus
Note: If the camera does not support an option, it is not displayed on the status page
SETUP STATUS CAM: 0083
DAY/NIGHT: DOME
LIFT: 0 GAIN: 00
PREV NEXT
ELECTRONIC ZOOM: 4X
EXP CONTROL: M/A
SHUTTER SPEED: AUTO
IMAGE FREEZE: OFF
SYNCHRONIZATION: INT
WHITE BALANCE: AUTO
CAMERA: LG LM703HM
TOUR STATUS CAM: 0083
001 ?SHADOWTOUR 1 X
004 ?PRESET TOUR 2 X
PREV NEXT
002 ?SHADOWTOUR 2
003 ?PRESET TOUR 1 X
005 ?SHADOWTOUR 3
006 ?SHADOWTOUR 4
007 ?PRESET TOUR 3 X
008 ?PRESET TOUR 4 X
To Next Page
Loading...
