Chapter 1
Programming
25
3. Use the keypad to enter the number (1 through 8) of the
tour to be titled and programmed. The Tour title entry
menu displays (Figure 54).
4. Confirm that the cursor (arrow) is under the tour ###.
5. To move the display location for the title up or down on
the screen, move the joystick up and down. (The title
cannot be moved from left to right.)
6. To enter or edit the title, move the cursor to the right
(inside the carets).
7. Move the joystick up and down to scroll to the desired
alphanumeric character.
8. Move the joystick right or left to move to the next
character or edit the previous character.
9. When the title is complete, press the iris + button to save
the title and return to the Tour titles menu.
10. Repeat steps 3 through
9 for any additional titles you
wish to set or edit. Otherwise, press iris - to return to the
Edit titles/areas menu.
Note: To display the tour title remove the ? as the first character. A
question mark as the first character in a title will make the title
blank.
Figure 54. Tour title entry menu
To Next Page
Loading...
