Intermatic ET90115C User Manual

ET90000 Series Electronic Timer
12
ENTER
ADVANCED OPTIONS
Use Advanced Options to edit already-existing
programming, congure circuits and zones, and set up
your system.
From the STATUS screen, press ENTER and navigate to
ADVANCED OPTIONS. Press ENTER to access DATE,
TIME, DST, or ASTRO on the DATE/TIME CONFIG
screen.
DATE
Press ENTER to correct the date.
TIME
Press ENTER to change the current time (hours,
minutes, AMor PM) or the display mode for the time
(12HOUR AM/PM or 24 HOUR).
DST (DAYLIGHT SAVING TIME)
Press ENTER to
enable/disable DST, set
the DST time zone, and
set up effective dates
(start and end date of
DST).
ASTRO
From ASTRO, you can
dene an Astronomic
zone (country, location
in country, and
quadrant location).
Also, if you need to
adjust the time of the
astronomic zone, you
can do so against
the “calculated time” from the ASTRO ADJUSTMENT
screen.
DT.DST.EFF—DATES
START DATE (SUN):
FOURTH WK OF FEB
END DATE (SUN):
FIRST WK OF OCT
DT.ASTRO .ADJUSTMENT
CALCULATED TIME
SUNRISE SUNSET
5:26 AM 5:29 PM
ENTER NEW TIME
SUNRISE SUNSET
5:26 AM 5:29 PM
CIRCUIT CONFIG
EDIT CKT NAME
ENABLE CKT EVENTS
MANUAL ACTIVATE MODE
EXTERNAL OVERRIDE
ZONE CONFIG
ADD ZONE
MODIFY ZONE
DELETE ZONE
HOLIDAY CONFIG
ADD HOLIDAY
MODIFY HOLIDAY
DELETE HOLIDAY
EVENT CONFIG
ADD EVENT
MODIFY EVENT
DELETE EVENT
SYSTEM CONFIG
REVIEW MODE
PROG COPY/RESTORE
PASSWORD SETUP
EDIT SYSTEM NAME
NETWORK SETUP
FIRMWARE UPDAT E
RESET TO FAC DEFAULT
ENTER
DATE/TIME CONFIG
DATE
TIME
DST
ASTRO
The conguration screens can be
navigated using the right or left keys. The
accompanying instructions are presented
based on a right-key sequence.
ADVANCED OPTIONS

Intermatic ET90115C Specifications

General

Brand	Intermatic
Model	ET90115C
Category	Timer
Language	English