UM094TW / UM594TW UDM094-04
19
4. Tape Specifications
Use Intertape Brand Pressure Sensitive Carton Sealing Tape.
The machine can accommodate 2” (48mm) or 3” (72mm) wide tape, depending on tape
heads supplied.
A maximum tape roll diameter of 16” (406 mm) on a 3” (76 mm) diameter core can be
installed on the tape head. (Accommodates all Intertape brand film tape machine roll
lengths).
The standard Tape Leg Length of 2.25 inches (57.2 mm) is factory set. The standard
tape leg length may vary up to ¼” (6mm) based on tape tension and line speed.
The standard tape leg length is adjustable +/- ¼. Refer to the tape head manual for
adjustment of tape leg length.
Note: For Further Specifications On The Tape Heads, Consult The Tape
Head Manual For Your Specific Tape Head.
To Next Page
Loading...