Interton ST660-DRW - Part List - Accessories - N-Cased Earmould, 3 Pin

Doc 0219660 rev. K
Page 20 of 32
Not subject to issue control when printed
Part List - Optional N-Cased Earmould, 3 Pin
Note:
If the UP rec is to be mounted, the N-Cased earmould must
be chosen. Please follow “N-Cased Earmould Process,RIE”
Doc 0248970 (for all sizes recs) - posted on GTO website
TUBE 3 PIN2
ENCASED EM RIE
TUBE 3 PIN3
ENCASED EM RIE
SIZE Part No Part No
SZ 0L
20097700 20588700
SZ 0R
20097710 20588710
SZ 1L
20097720 20588720
SZ 1R
20097730 20588730
SZ 2L
20097740 20588740
SZ 2R
20097750 20588750
SZ 3L
20097760 20588760
SZ 3R
20097770 20588770
SZ 4L
20097780 20588780
SZ 4R
20097790 20588790
Receiver Part No
REC,SONION 37AP015K (UP) 19413100
REC,ENCAS EM (HP) 20085800
REC,26UA01X (MP) 19701700
REC,E25SA010X/D (LP) 19701800
Difference between TUBE 3 PIN2 & TUBE 3 PIN3 is the length of the rec
cable after nal bend. TUBE 3 PIN3 has 3 mm longer rec cable after the nal
bend (can help to avoid making the N-cased shells bigger to reach the tube)
TUBE,ENCASED EM,RIE
REC,UP REC,LP REC,MP REC,HP