Interton ST660-DRW - Service Procedure & Postponement; Service Procedure; Postponement Procedure

Doc 0219660 rev. K
Page 26 of 32
Not subject to issue control when printed
Service Procedure & Postponement
Service Procedure:
- Save user settings with Fitting Software
- Disassemble faulty device
- Replace module with a new service module from stock
- Assemble device
- Restore user settings with Fitting Software
- Load customer serial No using DSA6000
Postponement Procedure:
- Disassemble device
- Replace parts with replacement kit/HSG parts from stock
- For Crisp & Share models: Transfer ID-plate from old housing to new housing
- Verify battery door by open and close once