L
Lauren LopezSep 14, 2025
How to remove surface debris from my pool using an Intex pool skimmer?
- JJennifer JonesSep 14, 2025
To deal with surface debris in your pool, use an Intex pool skimmer.
To Next PageTo Next PageHow to remove surface debris from my pool using an Intex pool skimmer?
To deal with surface debris in your pool, use an Intex pool skimmer.
General| Brand | Intex |
|---|---|
| Model | ECO20110-1 |
| Category | Water Pump |
| Language | English |
Instructions for installing the pool outlet strainer and plunger valve assembly.
Instructions for installing the pool inlet nozzle and plunger valve assembly.
Steps for assembling the motor and pre-filter components.
Steps for correctly installing the sand filter tank and its base.
Detailed instructions on how to load the correct type and amount of sand.
Steps for connecting the 6-way valve to the filter tank and motor.
Explanation of the different 6-way valve settings and their functions.
Steps for the initial setup and operation of the filter pump system.
Procedure to plug in, test, and turn on the saltwater system.
Guide to setting the daily operating hours for the saltwater system.
How to lock the control panel to prevent unauthorized changes.
Instructions for changing the previously set operating hours.
How to activate the boost cycle for increased sanitizer production.
Explanation of the system's power saving and stand-by modes.
How to operate only the filter pump without the saltwater function.
Guidance on selecting the appropriate type of salt for pool sanitation.
Recommended salt concentration for optimal system performance.
Step-by-step instructions for adding salt to the pool water.
Procedure to lower salt concentration if it becomes too high.
Formulas for calculating pool volume in gallons and cubic meters.
Instructions for using test strips to monitor pool water chemistry.
General advice on maintaining pool water clarity and hygiene with chemicals.
