To Next PageTo Next PageWhat causes chronic low water level in Intex Swimming Pool?
A chronic low water level in your Intex swimming pool can be caused by a rip or hole in the pool liner or hoses; repair it with a patch kit. It can also be caused by drain valves being loose; finger tighten all caps.
What to do with sediment on the bottom of Intex Swimming Pool?
Sediment on the bottom of your Intex swimming pool is often due to heavy use, like getting in and out of the pool. Use an Intex pool vacuum to clean the bottom of the pool.
General| Brand | Intex |
|---|---|
| Model | Krystal Clear 602G |
| Category | Swimming Pool Pump |
| Language | English |
Assemble pool first, then position filter pump near pool wall at recommended distance.
Connect hoses to pool liner and pump connections using hose clamps, ensuring tight fit.
Unscrew housing collar, check cartridge, reassemble cover, fill pool, and vent air release valve.
Connect pump to GFCI outlet and operate until desired water clarity is achieved.
Ensure pump is off, disconnect cord, remove inlet nozzle and strainer, insert plugs, unscrew housing collar.
Remove filter cartridge for cleaning or replacement. Clean with water hose or replace as needed.
Reinstall cartridge, seal, and cover. Rescrew collar, vent air, then replace nozzle and strainer.
