(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 04/10/2022
133
A
SAVE THESE INSTRUCTIONS
English
Page 13
LED CODE CHART
LED Reading Definitions
00
Stand-By Mode (Start-up)
01
Minimum Operating Hour (1 hour remaining)
02
Operating Hours (2 hours remaining)
03
Operating Hours (3 hours remaining)
04
Operating Hours (4 hours remaining)
05
Operating Hours (5 hours remaining)
06
Operating Hours (6 hours remaining)
07
Operating Hours (7 hours remaining)
08
Operating Hours (8 hours remaining)
09
Operating Hours (9 hours remaining)
10
Operating Hours (10 hours remaining)
11
Operating Hours (11 hours remaining)
12
Maximum Operating Hours (12 hours remaining)
36
Boost Mode (36 hours remaining)
48
Boost Mode (48 hours remaining)
60
Boost Mode (60 hours remaining)
90
Alarm Code (Low Pump Flow / No Flow)
91
Alarm Code (Low Salt Level)
92
Alarm Code (High Salt Level)
93
Stand-By Mode (Operating Process fi nished)
“BLANK”
No Power or “Power Saving Mode” waiting to start next
Saltwater System cycle.
IMPORTANT
When Code “90” alarm is shown, ensure the timer of the filter pump is set
one (1) hour longer than the Saltwater System.
If the filter pump does not have a built-in timer, the filter pump needs to
be turned on/off manually every day.
To Next Page
Loading...
Need help?
General
