To Next PageTo Next PageWhy is the water in my pool colored, even with my Intex SF15220 Water Pump?
The water may be colored because copper, iron, or manganese in the water are being oxidized by the added chlorine. Adjust the pH level to the recommended level and run the filter until the water is clear.
What causes chronic low water level in a pool using an Intex SF15220 Water Pump?
A rip or hole in the pool liner or hoses can cause this; repair with a patch kit. Also, check if the drain valves are loose and finger tighten all caps.
General| Brand | Intex |
|---|---|
| Model | SF15220 |
| Category | Water Pump |
| Language | English |
Key safety instructions and warnings for operating the sand filter pump safely.
Comprehensive list of all components with reference numbers and descriptions.
Instructions for installing pool outlet strainers and inlet nozzles.
Steps for installing the pump, pre-filter, sand tank, and 6-way valve.
Guidance on connecting hoses for both Intex and non-Intex pools.
Details on power, pressure, flow rate, and recommended filtering media.
Explanation of 6-way valve positions and their functions.
Steps for starting the pump and initial system operation and backwashing.
How to operate the pump using the timer or manually.
Required operating time for Intex pools with and without saltwater systems.
Required operating time for non-Intex pools based on water capacity.
Detailed steps for cleaning the motor pre-filter assembly.
Guidance on maintaining pool water clarity and chemical balance.
Instructions for safely storing the sand filter pump for the off-season.
Addresses common problems like pump failure, slow flow, and leaks.
Identifies common pool issues like algae, colored water, and sediment.
General safety recommendations for water recreation and pool use.
Details of the product's limited warranty, terms, and exclusions.
