12
limits. Press
to return to EDIT.
NOTE: PARAMETER TABLE IS COMPLETE PLEASE REVIEW THE TABLE FOR ACCURACY.
To review the table, continue pressing the
key until the display returns to EDIT.
SETTING VALUES IN SPACE TABLE
Press the ITL950C will display; SPACE 1 = (0000). Enter the desired space information
in thousandths of and inch e.g. .250. Press on the keyboard, then press
to set entry and to continue to SPACE 2 ect., until all space entries are completed. The
ITL950C will automatically return to EDIT.
SETTING VALUES IN DEPTH TABLE
Press the ITL950C will display DEPTH 0 = ( - - - - ). Enter the desired depth
information in thousandths of and inch e.g. .335. Press . Then to set entry
and to continue to DEPTH 1=0000. Now continue to make entries until all depth entries are
completed. The ITL950C will automatically return to EDIT.
Press key, the ITL950C will display PUSH “—“ TO UPDATE TABLE, CLEAR TO
CANCEL. Press key to set entries. Now follow display commands to return to default.
To sum up be sure your entries are all correct and should your new code fail to work as
expected, DON’T PANIC, recheck the table and you will likely find an error in one of your entries.
To view or edit your entries press , display will read EDIT. Press
, display will read EDITING ID 0803 continue to press to cycle through
the new ID parameters. To review the numeric entries in the space file, press and ,
then continue pressing the key. To review the depth file, press the number set in the minimum
depth setting and continue pressing the key through all depth settings.
To Next Page
Loading...