Invacare BAR600IVC User Manual (English)

Questions and Answers:

K
Krista WaltersJul 31, 2025
What to do if the bed section of my Invacare BAR600IVC Medical Equipment does not move?
- D
  David WallaceJul 31, 2025
  If the bed section of your Invacare Medical Equipment isn't moving, start by checking if the power cord is securely plugged into a power source. Next, make sure the pendant is correctly connected to the junction box and that the pendant cable isn't tangled or pinched. Also, check your household fuse or breaker box. If these steps don't resolve the issue, the end of stroke may have been reached; try operating the opposite button. If the cables are entangled or pinched, carefully untangle them. For motor issues or cable repairs, it's best to call your dealer. Also, for Hi/Lo motor check that the drive shaft is correctly installed.
G
Gina KingAug 6, 2025
Why Hi/Lo function does not work on my Invacare full electric bed?
- W
  wwagnerAug 6, 2025
  If the Hi/Lo function on your Invacare full electric bed isn't working, first ensure the power cord is plugged into a power source. Check that the pendant is correctly connected to the junction box and that the cable isn't entangled or pinched. Also, check your household fuse or breaker box. If the cables are entangled or pinched, carefully untangle them. If these steps don't help, or if the motors aren't functioning, it's best to call your dealer for assistance. Also, for Hi/Lo motor check that the drive shaft is correctly installed.
N
Nathan SanchezAug 11, 2025
What to do if the bed spring on my Invacare BAR600IVC does not stop moving?
- S
  Shawn RussellAug 11, 2025
  If the bed spring on your Invacare Medical Equipment doesn't stop moving, check the pendant for depressed or stuck buttons. If a button is stuck, you should call your dealer for repair.
T
Terri JuarezAug 18, 2025
How to keep my Invacare BAR600IVC bed from moving?
- J
  James CarrilloAug 18, 2025
  If your Invacare Medical Equipment bed is not staying in place, make sure that the locking casters are locked.
D
Danielle AvilaAug 25, 2025
What to do if the Hi/Lo function on my Invacare Medical Equipment Full Electric Bed doesn't work?
- P
  pcarrollAug 25, 2025
  If the Hi/Lo function on your Invacare Full Electric Bed isn't working, start by checking if the bed is properly plugged into a power source. Next, make sure the pendant is correctly connected to the junction box and that its cable isn't tangled or pinched. Also, check the motor cables for proper connection and ensure they are free from entanglement. Examine your household fuse/breaker box. If the motors are still not functioning, it is recommended to call your dealer.

Invacare BAR600IVC Specifications

General

Frame Material	Steel
Seat Material	Vinyl
Armrest Material	Plastic
Foldable	Yes
Color	Blue
Weight Capacity	300 lbs
Overall Width	25 inches (63.5 cm)
Seat Width	18 inches (45.7 cm)
Seat Depth	16 inches (40.6 cm)
Armrest Height	9 inches (22.9 cm)
Wheel Size	5 inches
Footrests	Swing-away