Invacare BAR600IVC - Storing the Beds

8 PACKAGING, HANDLING AND SET-UP
Part No 1123842 45 Invacare
®
IVC
™
Model BAR600IVC Bariatric Bed
FIGURE11 Inspecting the Bed
8.5 Storing the Beds
If bed is not being assembled immediately, retain the cartons and packaging for storage until ready for assembly.
Store the Invacare homecare bed in a dry area.

WARNING
DO NOT place other objects on top of the cartons.
Power Cord
Pendant and Cord
Full-Electric
Junction Box
Foot Motor Connector
Power Cord
Connector
Head Motor Connector
Hi/Lo Motor
Connector
Pendant Cord
Connector
Pull Tube
DETAIL “A”
All cable connections MUST be aligned properly. Align locking levers
with locking tabs for proper connection. Mis-alignment of cable
connections will cause permanent product damage.
Locking Lever
Crossover
Cable
Head Motor
Cable
Locking Tab
P/N 1171770 Rev A
CAUTION
JUNCTION BOX CONNECTOR IDENTIFICATION