EasyManua.ls Logo

Invacare Leo - Troubleshooting; Caution

Invacare Leo
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
9.3.5 TROUBLESHOOTING
1. If the POWER LED is off:
Check that the input voltage (115V/230V) is correct and that the charging cable is correctly
connected.
If the LED still does not light, please contact your dealer.
2. If the CHARGING LED is off:
Check that the charging cable is correctly connected.
If the battery is fully charged, the charger will switch to trickle charge mode and the CHARGING LED
light goes out.
If the charging process was not started (orange LED), the battery could be faulty. Please contact
your dealer.
3. If the CHARGING LED does not change from orange to green:
The battery cannot be charged correctly. It may be faulty. Please contact your Invacare dealer.
4. If the CHARGING LED changes from orange to green immediately:
The battery is either fully charged or faulty. Please contact your dealer.
9.3.6 CAUTION
In order to extend the service life of the charger, you should not leave the electric vehicle connected to it
for prolonged periods.
Do not use the charger for totally discharged batteries or when the batteries are faulty.
Use the charger in a well ventilated room.
Only use the charger for gel or AGM batteries (13-60 Ah).
Do not use for a voltage input other than that specified. Make sure that the voltage input (115V or 230V)
is correctly set.

Table of Contents

Other manuals for Invacare Leo

Related product manuals