Invacare Leo - Technical Specifications; Operating and Storage Conditions; Electrical System Specifications; Charging Device Specifications

81
14 Technical specifications
The technical information provided hereafter applies to a standard configuration or represents
maximum achievable values. These can change if accessories are added. The precise changes to
these values are detailed in the sections for the respective accessories.
Permissible operating and storage conditions
Temperature range for operation according to ISO 7176-9:
• -25° … +50 °C
Temperature range for storage according to ISO 7176-9:
• -40° … +65 °C
Electrical system
Motors
• 1 x 240 W
Batteries
• 2 x 12 V/36 Ah (C20) leakproof/AGM
• 2 x 12 V/40 Ah (C20) leakproof/AGM
Main fuse
• 70 A
Charging device
Output current
• 5 A ±
Output voltage
• 24 V nominal (12 cells)
Input voltage
• 200 – 250 V nominal
Operating temperature (surroundings)
• -25° ... +50 °C
Storage temperature
• -40° ... +65 °C
Tyres
Tyre type
• 3.00 - 4 pneumatic
The recommended maximum tyre pressure in bar or kpa is marked on the side
wall of the tyre or the rim. If more than one value is listed, the lower one in the
corresponding units applies.
(Tolerance = -0.3 bar,1 bar = 100 kpa)