EasyManuals Logo

Invacare Perfecto2 IRC5PO2 User Manual

Invacare Perfecto2 IRC5PO2
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
SECTION 3—HANDLING
Part No 1143482 11 Perfecto
2
Series
SECTION 3—HANDLING
The concentrator should ALWAYS be kept in the upright
position to prevent cabinet damage while being transported.
If the concentrator is to be reshipped by common carrier,
additional cartons are available from Invacare.
Unpacking
NOTE: For this procedure, refer to FIGURE 3.1.
1. Check for any obvious
damage to the carton or
its contents. If damage is
evident, notify the
carrier, or your local
dealer.
2. Remove all loose packing
from the carton.
3. Carefully remove all the
components from the
carton.
FIGURE 3.1 Unpacking
NOTE: Unless the oxygen concentrator is to be used immediately,
retain containers and packing materials for storage until use of the
concentrator is required.
Inspection
Inspect/examine exterior of the oxygen concentrator for nicks,
dents, scratches or other damages. Inspect all components.
Storage
1. Store the repackaged oxygen concentrator in a dry area.
2. DO NOT place objects on top of repackaged concentrator.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Invacare Perfecto2 IRC5PO2 and is the answer not in the manual?

Invacare Perfecto2 IRC5PO2 Specifications

General IconGeneral
Flow Rate0.5 to 5 LPM
Outlet Pressure5.5 PSI
Oxygen Concentration87% to 95.6%
Dimensions23 in (H) x 13 in (W) x 12 in (D)
Electrical Requirements120 VAC, 60 Hz
Operating Temperature55°F to 90°F (12°C to 32°C)
Operating Humidityup to 95% non-condensing
Sound Level≤45 dB(A)
Noise Level≤45 dB(A)

Related product manuals