86
9.2.1.2 Setting the angle
PLEASE NOTE: Danger of injury due to incorrect adjustment of the footrests and legrests.
• Before and during every journey it is imperative to ensure that neither the legrests nor the
steering wheels contact the ground!
Requirements:
• 1x Allen key 6 mm
• metal drift with maximum 4 mm diameter
• hammer
• Loosen the screw (1) using the Allen key.
• If the footrest cannot be moved after loosening the screw,
position a metal pin in the designated borehole (2) and use
a hammer to knock on this lightly. The clamping mechanism
in the interior of the footrest will be released by this. Repeat
the procedure from the other side of the footrest if
necessary.
To Next Page
Loading...
