the unit goes on working under the condition before the
grille by
stop for a minute and then start, adjusting by remote
when starting it next time, just press ON/OFF button and
HEALTH AIRFLOW OperationECOPILOT Operation
the body
direct to the body
In heating, it is better to select the
In cooling, it is better to select the
locations, the swing flap will blow alternatively between
“Avoid” function: When the appliance detects a person in
1) When there are people in several locations or a
person frequently moves between several locations,if this
person is in the in-between location or the crossing
2) Whether the setting is “Follow” or “Avoid”, it takes some
temperature setting, ambient temperature difference and
(including follow/avoid) function is enabled will force exit
enabled.
6) When the human sensing function is enabled, if the
mode. In the power saving mode, the operating frequency
will will be reduced and the fan speed set at low. Once
a person is detected, the appliance will exit from
7) When the human sensing function is enabled, the
movements and adjust the frequency and fan speed
movements are frequent, the frequency and fan speed will
lower down; when the movements become less, the
frequency and fan speed will rise but cannot exceed the
setting values set by the remote controller. The cooling
To Next Page
Loading...
Need help?
General
