To Next Page
D
Dennis RobertsSep 10, 2025
What to do if detergent residues are left in the detergent reservoir of my Inventum Dishwasher?
- AalexfernandezSep 10, 2025
Detergent residues in the reservoir may be due to adding detergent when the reservoir was damp.
What to do if detergent residues are left in the detergent reservoir of my Inventum Dishwasher?
Detergent residues in the reservoir may be due to adding detergent when the reservoir was damp.
How to solve inadequate water supply in Inventum Dishwasher?
First, check if the tap is fully open and there are no blockages in the water mains. Then, close the tap, remove the input hose, and inspect it for clogs. Restart the dishwasher. If the issue persists, contact Inventum's service department.
What to do if my inventum IVW6034A Dishwasher has partial food wastes left on the dishes?
Partial food wastes left on the dishes may occur if the dishes aren’t placed correctly, preventing the spray arms from reaching everything, if the basket is overloaded, if the dishes lean against each other, if too little detergent is added, if the wrong program is selected, if one of the spray arms is clogged with food waste, if the filters are clogged or not placed correctly, or if the water drain pump is clogged.
Why is water left inside my inventum IVW6034A at the end of the cycle?
Water may remain in the dishwasher after a cycle if the water drain hose is clogged or twisted, the filters are clogged, or the cycle hasn't finished.
How to fix whitish stains on dishes in Inventum Dishwasher?
Whitish stains on dishes can appear if too little detergent is added, the rinse aid dosage is too low, no special salt is added despite high water hardness, the water hardness level is set too low, or the salt reservoir cap isn't closed properly.
How to prevent rust stains on dishes in inventum IVW6034A?
Rust stains on dishes may be caused by insufficient stainless steel quality of the dishes, too high a dosage of salt, a salt reservoir cap that isn't closed correctly, salt spillage inside the dishwasher during refilling, or polluted water mains.
What to do if the water temperature is not correct in inventum IVW6034A?
Contact the service department of Inventum.
What to do when safety is activated against water overflow in inventum IVW6034A?
Turn off the dishwasher and close the tap. Contact the service department of Inventum.
What to do if indicator lights won’t go off after cycle is finished in inventum IVW6034A?
If the indicator lights remain on after the cycle, the On/off button might not be released yet.
How to stop water supply that is not stopping in Inventum Dishwasher?
Close the tap. Contact the service department of Inventum.
Guidance on authorized service installation, electrical checks, and cable safety.
Advice on choosing a location, proximity to utilities, and ensuring the appliance is level.
Details on water supply suitability, inlet hose connection, pressure, and drain hose placement.
Requirements for earthing, voltage, fuse rating, and safe plug usage.
A guide to common problems, error indicators, and their solutions.
Guidance on authorized service installation, electrical checks, and cable safety.
Advice on choosing a location, proximity to utilities, and ensuring the appliance is level.
Details on water supply suitability, inlet hose connection, pressure, and drain hose placement.
Requirements for earthing, voltage, fuse rating, and safe plug usage.
A guide to common problems, error indicators, and their solutions.
General| Brand | inventum |
|---|---|
| Model | IVW6034A |
| Category | Dishwasher |
| Language | English |
