changed. The Photo mode feature is not available when the Setup Menu is accessed
from an audio “directory” screen.
The “thumbnails” screen shows a preview of all photos contained on the memory card.
If a memory card is not installed, the “thumbnails” screen shows a preview of all photos
in the frame’s internal memory.
1. Press the SETUP
button to display the Setup Menu.
2. Use the UP
or DOWN button to highlight Photo mode, then press the
RIGHT
Viewing Photos
button to display the available display options.
•
Use the LEFT, RIGHT, UP and DOWN buttons to scroll the screen backward and
forward through the available photos. The currently selected photo is bordered in red.
3. Use the UP or DOWN button to highlight the desired display option, then
press the ENTER
• Press the ENTER button to enter the “Single Photo” display mode, and display the
currently selected photo.
button to confirm your choice:
• The Auto fit option displays your photos at in their original sizes.
• Use the LEFT and RIGHT buttons to scroll backward and forward through the
available photos.
• The Full option “stretches” your photos to fill the screen. Your photos may
appear slightly distorted when using the Full option.
• Press SLIDESHOW to enter slideshow display mode, under Slideshow display mode,
press the ENTER button to pause the slideshow, the “Pause” PAUSE (
• The Pan scan option “enlarges” your photos to better fit the screen, and “crops”
parts of the photo from the sides, or from the top and bottom, depending on the
orientation of the frame and the size of the photo.
) icon
shows briefly on the screen.
Press the ENTER button again to replay the slideshow, the “Play” (
) icon shows
briefly on the screen.
4. Press the EXIT
button twice to close the menu.
• Press the EXIT button to return to the “thumbnails” screen.
Setting the Music Repeat Option
USING THE REMOTE CONTROL
The Music repeat feature lets you select the “repeat” option for your audio files. The
Music repeat feature is not available when the Setup Menu is accessed from the
“thumbnails” screen, or when the Digital Picture Frame is in “Single Photo” display mode.
The Remote Control lets you use the advanced features and functions of the Digital
Picture Frame, as well as providing access to the “Setup” menus. For “basic” operation of
the frame, refer to “USING THE FRAME CONTROLS.”
1. Press the SETUP
button to display the Setup Menu.
When your memory card is properly installed in the Digital Picture Frame, turn the
POWER switch ON. The Digital Picture Frame enters the “Slideshow” mode. Press the
EXIT button to display the “thumbnails” screen.
2. Use the UP or DOWN button to highlight Music repeat, then press the
RIGHT button to display the available repeat options.
The “thumbnails” screen shows a preview of all photos contained on the memory card.
If a memory card is not installed, the “thumbnails” screen shows a preview of all photos
in the frame’s internal memory.
3. Use the UP
or DOWN button to highlight the desired repeat option, then
press the ENTER button to confirm your choice:
• None: Playback will cycle once through all available audio files, then stop.
• One: Playback will repeat the current file continuously.
To Next Page
Loading...