Invion DPF-10BAS - SLIDESHOW AND DISPLAY SETTINGS; Setting Up Slideshow Speed; Adjusting Image Display

2. Use the UP
or DOWN button to highlight Language, then press the
RIGHT
Viewing Photos
button to display the available display languages.
•
Use the LEFT , RIGHT , UP and DOWN buttons to scroll the screen
backward and forward through the available photos.
• A checkmark is shown next to the currently selected display language.
or DOWN
3. Use the UP
button to highlight the desired display language,
then press the ENTER
• Press the CARD button to toggle the “thumbnails” display between the memory
card, the frame’s internal memory, and any other currently installed memory devices.
button to confirm your choice.
• Press the ENTER button to enter the “Single Photo” display mode, and display
the currently selected photo.
• The screen refreshes to display the menu in the selected language.
4. Press the EXIT
button twice to close the menu.
• Use the LEFT and RIGHT buttons to scroll backward and forward through
the available photos.
Setting Up the Slideshow
• Press the SPEED button to change the “Slideshow” transition speed. Each time
you press the button, the new speed shows briefly at the bottom of the screen.
The Slide speed feature lets you set the length of time each photo displays before
transitioning to the next photo. The available intervals are fast, normal and slow. The
Slide speed feature is not available when the Setup Menu is accessed from an audio
“directory screen, or when the frame is in “Single Photo” display mode.
• Press SLIDESHOW to enter slideshow display mode, under Slideshow display mode,
press the ENTER button to pause the slideshow, the “Pause” PAUSE (
) icon
shows briefly on the screen.
1. Press the SETUP
button to display the Setup Menu.
Press the ENTER button again to replay the slideshow, the “Play” (
) icon shows
briefly on the screen.
2. Use the UP
or DOWN button to highlight Slide speed, then press the
RIGHT
• Press the ROTATE button to change the orientation of the photo. In some cases,
a photo may not appear properly oriented in the frame. The ROTATE button lets
you rotate the currently displayed photo so it is properly oriented in the frame. The
photo is rotated in 90-degree increments.
button to display the available display intervals.
3. Use the UP or DOWN button to highlight the desired display language,
then press the ENTER button to confirm your choice.
• Press the EXIT button to return to the “thumbnails” screen.
4. Press the EXIT
button twice to close the menu.
When the Digital Picture Frame is placed in “Slideshow” display mode, photos will
transition at the selected display interval.
Viewing Selected Photos
Normally, when viewing photos in “Slideshow” display mode, or scrolling through photos
in “Single Photo” display mode, the Digital Picture Frame shows all photos on your
memory card. If you wish, you can choose to display selected photos only.
Adjusting the Image Display
1. Access the desired “thumbnails” screen.
Depending on the original size of your photos, the photos may not completely fill the
screen. The Photo mode feature lets you digitally “stretch” or “crop” your photos to
better fit the screen. The Photo mode options only affect the way the photos are
displayed on the Digital Picture Frame. The photos on your memory card are not