REMOTE CONTROL Downloading Files from a Memory Card
1. Turn the Digital Picture Frame OFF.
1. ON/OFF button
2. Install the memory card containing the files you wish to download.
• Turns power to the Digital Picture Frame on and
off.
1
2
3
4
6
5
7
8
9
10
11
12
13
14
15
16
3. Turn the Digital Picture Frame ON.
MODE button
2.
4. Press the EXIT button to display the “thumbnails screen.
• Toggles the “thumbnails” screen between “photo”
and “audio” modes.
5. If necessary, press the CARD
button until the “thumbnails” screen for the
memory card containing your files is displayed.
UP button
3.
• If you wish to download audio files, press the MODE button to display the
audio “directory.”
• When viewing the “thumbnails” screen, scrolls
up (backwards) through the available photos or
audio files.
• When in “Setup” mode, scrolls backwards through the available menu options.
4.
SETUP button
• Displays the “Setup” menu for the currently active screen.
5.
LEFT button
• When viewing the “thumbnails” screen or in “Single Photo” display mode, scrolls
backward through the available photos.
• When in “Setup” mode, closes the submenu for the currently selected option.
6.
DOWN button
• When viewing the “thumbnails” screen, scrolls down through the available photos.
• When in “Setup” mode, scrolls forwards through the available menu options.
7.
SELECT button
• Lets you select one or more photos or audio files for display playback.
8.
CARD button
• Lets you select the source for photos or audio files, either internal memory or
memory card.
6. Use the LEFT , RIGHT , UP and DOWN buttons as appropriate to
highlight the first photo or audio file you wish to select.
7. Press the SELECT
button to select the photo/audio file.
• If you selected a photo, a checkmark displays in the upper right corner of the
“thumbnail.”
• If you selected an audio file, a checkmark displays to the right of the file name.
, RIGHT , UP
8. To unselect a photo or audio file, use the LEFT
and
DOWN buttons as appropriate to highlight a selected photo/file, then press the
SELECT button.
• The checkmark is removed.
9. Repeat steps 6 through 8 to select or unselect additional photos or audio files.
10. When all the desired photos/files have been selected, press the SETUP
button
to display the Setup Menu.
11. Use the UP or DOWN button to highlight Copy jpg file to (for photos) or
Copy mp3 file to (for audio files), then press the RIGHT button twice.
• A confirmation message displays.