5.4 Mounting bracket installation
Find out the mounting brackets, fixing screws in the charger package.the installation method like the follow pictures.
Installation Schematic diagram of the support hanging ear
5.5 Installation the whole Charger
Install the charger into the rear plate from top to bottom according to the relationship between the mounting bracket and the
mounting holes .
Use a screwdriver to fixing the mounting bracket to the place where they are connected to the rear plate
Installation schematic diagram of the support hanging ear installation
Mounting rear plate fixed to the
wall
Charger main body housing
5.6 End and check
After finish installing with the above steps, you also need to complete the follow work:
The Charger is not equipped with the parts for mounting the gun cable, it shall install the parts for mounting this cable
according to the installation situation .
The cable should be fixed by tying the belt or other fixed methods.
To Next Page
Loading...