1. About this manual
1.1 Using this manual
This manual is only applicable to the installation and operation of EVC16 series 7KW,11KW and 22kW AC power supply
Charger.
This manual provides the information required to perform the following work:
Installation work of the charger.
Daily fault diagnosis and maintenance of the charger.
The manual may be updated with the product upgrade iteration, but the change may not affect the normal reading and execution
of the user.
1.2 Applicable areas
This manual is applicable to the EU Community countries and other areas that use charging standard IEC61851-1&
IEC61851-21-2.
1.3 Applicable group
This manual is designed for the qualified engineers with electrical license.
In addition to being used by professional engineers, users can also strictly follow the process described in this document to
perform simple maintenance.
1.4 Illustration
The illustrations in this document have show most of the product information include some normal functions and typical
settings of the product.
1.5 How to use this manual
Ensure that you understand all the contents of this manual is the prerequisite for your correction use .
Please read the safety section carefully to ensure that you understand all the safety instructions.
1.6 General Introduction
The INVT EVC16 series EV charger is designed to charge a electric vehicle or a hybrid plug in electric vehicle at your home or
apartment. Our chargers provide you with safe, reliable, fast, and smart charging solutions. The difference between the INVT 7KW,
11KW, 22KW AC EV charger is that the single phase or three phase electrical installation, while the latter 11KW and 22KW support
400V voltage input. The installation procedures for the three models are almost the same.This manual describing the installation
steps both single phase and three phase input. This manual will instruct you how to install and use this charger. You can access
chargers to the Internet through WIFI, control chargers and check running information on your phone APP.
Intended Use
The INVT AC EV charger for home is intended for the AC charging of EV. It is intended for both indoor and outdoor use.
Note: The images and illustrations description in this manual may differ slightly from the actual ones
To Next Page
Loading...
Need help?
General