INVT GD300-2R2G-4 - Page 115

Goodrive300 Series VFD Function parameters
110
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
motor 2
the motor and the standard
one is huge, the features of
the VFD will decrease.
Note: Reset the rated power
of the motor (P12.01),
initialize the motor parameter
of P12.02–P12.05.
P12.06
Stator resistor
of
asynchronous
motor 2
0.001–65.535Ω
After finish the motor
parameter autotuning, the set
value of P12.06–P12.10 will
renew automatically. These
parameters are basic
parameters controlled by
vectors which directly impact
the features.
Note: Users cannot modify
the parameters freely.
Depend
on
model
○
P12.07
Rotor resistor
of
asynchronous
motor 2
0.001–65.535Ω
Depend
on
model
○
P12.08
Leakage
inductance of
asynchronous
motor 2
0.1–655.35mH
Depend
on
model
○
P12.09
Mutual
inductance of
asynchronous
motor 2
0.1–655.35mH
Depend
on
model
○
P12.10
Non-load
current of
asynchronous
motor 2
0.1–6553.5A
Depend
on
model
○
P12.11
Magnetic
saturation
coefficient 1
for the iron
core of AM2
0.0–100.0%
80.0%
◎
P12.12
Magnetic
saturation
coefficient 2
for the iron
core of AM2
0.0–100.0%
68.0%
◎