Need help?Do you have a question about the INVT GD300L-011G-4 and is the answer not in the manual?
General| Model | GD300L-011G-4 |
|---|---|
| Type | Inverter |
| Output Power | 11kW |
| Efficiency | ≥ 98% |
| Cooling Method | Forced Air Cooling |
| Protection Level | IP20 |
| Operating Temperature | -10°C to +50°C |
| Input Voltage | 380V |
| Communication Interface | RS485 |
| Storage Temperature | -20°C to +60°C |
| Humidity | 5~95%, without condensation |
| Altitude | Below 1000m, derating above 1000m |
Provides essential guidelines for safe operation, installation, and maintenance procedures.
Guides through essential steps for initial setup and parameter configuration for basic operation.
Lists key electrical and technical features, including input/output ratings and control features.
Provides detailed rated power, current, voltage, and performance specifications.
Covers environmental requirements, installation sites, direction, and mounting methods.
Details main circuit and control circuit wiring, including terminal functions and diagrams.
Guides on navigating menus and modifying function codes using the keypad.
Lists and describes the inverter's configurable function parameters for various operations.
Provides wiring diagrams for multi-step and analog speed running modes.
Details essential parameters to set after correct wiring for proper inverter operation.
Guides on testing and adjusting motor parameters, S-curves, and comfortability.
Explains different running modes like multi-step, analog tracking, and emergency running.
Lists common inverter faults, their possible causes, and suggested corrective actions.
Provides flowcharts for diagnosing common motor and inverter operational issues.
Details the RS485 interface, baud rates, transmission distance, and connection methods.
Explains Modbus RTU frame structure, command codes, data addressing, and error checking.
Explains the Safe Torque Off (STO) function, its logic, faults, and installation checklist.
Guides on selecting and installing brake resistors or units for sharp braking and high inertia loads.
To Next Page