INVT Goodrive20-EU VFD Series - Monitoring Motor and VFD Characteristics

Goodrive20-EU series VFD Function parameters
99
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
P17.10
Motor
frequency
evaluation
Evaluate the motor rotor frequency on open loop
vector
Range: 0.00 – P00.03
●
P17.11
DC bus voltage
Display current DC bus voltage of the VFD
Range: 0.0 – 2000.0V
●
P17.12
Switch input
terminals state
Display current Switch input terminals state of
the VFD
Range: 0000 – 00FF
●
P17.13
Switch output
terminals state
Display current Switch output terminals state of
the VFD
Range: 0000 – 000F
●
P17.14
Digital
adjustment
Display the adjustment through the keypad of the
VFD.
Range : 0.00Hz – P00.03
●
P17.15
Torque
reference
Display the torque reference, the percentage to
the current rated torque of the motor.
Setting range: -300.0% – 300.0%
(the rated current of the motor)
●
P17.16
Linear speed
Display the current linear speed of the VFD.
Range: 0 – 65535
●
P17.17
Reserved
●
P17.18
Counting value
Display current counting number of the VFD.
Range: 0 – 65535
●
P17.19
AI1 input
voltage
Display analog AI1 input signal
Range: 0.00 – 10.00V
●
P17.20
AI2 input
voltage
Display analog AI2 input signal
Range: 0.00 – 10.00V
●
P17.21
AI3 input
voltage
Display analog AI2 input signal
Range: -10.00 – 10.00V
●
P17.22
HDI input
frequency
Display HDI input frequency
Range: 0.000 – 50.000kHz
●
P17.23
PID reference
value
Display PID reference value
Range: -100.0 – 100.0%
●
P17.24
PID feedback
value
Display PID feedback value
Range: -100.0 – 100.0%
●
P17.25
Power factor of
the motor
Display the current power factor of the motor.
Range: -1.00 – 1.00
●