INVT Goodrive20-EU VFD Series - 4 Keypad Operation Procedure; 4.1 Keypad Introduction and Components

Goodrive20-EU series VFD Keypad operation procedure
26
4 Keypad operation procedure
4.1 Keypad introduction
The keypad is used to control Goodrive20-EU series VFDs, read the state data and adjust
parameters.
RUN/TUNE FWD/REV LOCAL/REMOT
TRIP
1
2
HZ
A
RPM
V
%
PRG
ESC
DATA
QUICK
JOG
SHIFT
RUN
STOP
RST
Figure 4-1 Film keypad
1
2
4
3
5
PRG
ESC
DATA
QUICK
JOG
SHIFT
RUN
STOP
RST
RUN/TUNE FWD/REV LOCAL/REMOT TRIP
HZ
A
V
RPM
%
Figure 4-2 External keypad
Note:
1. The film keypad is standard for the VFDs of 1PH 230V/3PH 400V (≤2.2kW) and the VFDs
of 3PH (≤0.75kW). The external keypad is standard for the VFDs of 3PH 400V (≥4kW) and
3PH 230V (≥1.5kW).
2. The external keypads are optional (including the external keypads with and without the
function of parameter copying).