INVT Goodrive300 Series User Manual

Goodrive300 Series VFD Basic operation instruction
187
Function
code
Name
Detailed instruction of parameters
Default
value
13: Input side phase loss (SPI)
14: Output side phase loss (SPO)
15: Overheat of the rectifier module
(OH1)
16: Overheat fault of the inverter module
(OH2)
17: External fault (EF)
18: 485 communication fault (CE)
19:Current detection fault (ItE)
20: Motor antotune fault (tE)
21: EEPROM operation fault (EEP)
22: PID response offline fault (PIDE)
23:Braking unit fault (bCE)
24: Running time arrival (END)
25: Electrical overload (OL3)
26: Panel communication fault (PCE)
27: Parameter uploading fault (UPE)
28: Parameter downloading fault (DNE)
29: PROFIBUS communication fault
(E-DP)
30: Ethernet communication fault
(E-NET)
31: CANopen communication fault
(E-CAN)
32:Grounding short circuit fault 1 (ETH1)
33:Grounding short circuit fault 2 (ETH2)
34:Speed deviation fault (dEu)
35: Maladjustment (STo)
36: Undervoltage fault (LL)
P07.33
Running frequency at
current fault
0.00Hz
P07.34
Ramp reference
frequency at current fault
0.00Hz
P07.35
Output voltage at current
fault
0V
P07.36
Output current at current
fault
0.0A
P07.37
Bus voltage at current
0.0V

INVT Goodrive300 Series Specifications

General

Brand	INVT
Model	Goodrive300 Series
Category	DC Drives
Language	English