iMars grid-tied solar inverters Safety precautions
6
1.1 Icons
This manual provides relevant information with icons to highlight the physical and property safety
of the user to avoid device damage and physical injury.
The icons used in this manual are listed below:
Serious physical injury or even death
may occur if not follow the relative
requirements
Physical injury or damage to the devices
may occur if not follow the relative
requirements
Damage may occur if not follow the
relative requirements
Sides of the device may become hot. Do
not touch
The procedures taken for ensuring
proper operation.
1.2 Safety guidelines
The first thing after receiving is to check for any visible damage to the
package or to the inverter. If there is something suspected, contact the
shipping company and local dealer before installing.
The installation and operation of PV inverter must be carried out by
professional technicians who have received professional trainings and
thoroughly familiar with all the contents in this manual and the safety
requirements of the electrical system.
Do not carry out any wiring and inspection or changing components when
the power supply is applied.
Ensure that there is no electromagnetic interference from other electrical
and electronic equipment on the installation site.
Do not refit the inverter unauthorized.
All the electric installation needs to be compliance with the national or local
laws and standards.
To Next Page
Loading...
Need help?
General