Inxpect LBK System - User Manual

Other manuals for Inxpect LBK System

Questions and Answers

R
Ruben JohnsonAug 11, 2025
What to do if Inxpect Security Sensors are not activated as expected?
- T
  Timothy MccoyAug 11, 2025
  If the Inxpect Security Sensors are not activated as expected, consider these potential causes and solutions: 1. **Obstructions:** Remove any objects blocking the sensor's field of vision. If removal isn't possible, implement additional safety measures in the impacted area. 2. **Sensor Positioning:** Ensure the sensors are positioned so the monitored area adequately covers the dangerous area. 3. **Inclination and Height:** Adjust the inclination and height of the sensors to ensure adequate monitoring of the dangerous area. Record or update the sensor's inclination and height in the configuration report. 4. **Restart Delay:** Modify the restart delay using the Inxpect Safety application (Settings > Sensors).
P
Pamela DavisAug 21, 2025
Why Inxpect Security Sensors are not activated as expected?
- S
  schultzpaulAug 21, 2025
  If Inxpect Security Sensors are not activated as expected, it could be due to several reasons: * Objects obstructing the sensor's field of vision. If this is the case, remove the object or add safety measures. * Incorrect sensor positioning. Reposition the sensors to properly monitor the dangerous area. * Improper sensor inclination or height. Adjust the sensor's inclination and height, and update the configuration report. * Inadequate restart delay. Adjust the restart delay via the Inxpect Safety application (Settings > Sensors).
R
Ronald AliSep 1, 2025
How to troubleshoot Inxpect Security Sensors that are not activated as expected?
- K
  Keith DavisSep 1, 2025
  To troubleshoot Inxpect Security Sensors that are not activating as expected, check the following: * **Obstructions:** Ensure there are no objects blocking the sensor's view. Remove any obstructions or implement additional safety measures. * **Sensor Position:** Verify that the sensors are positioned correctly to adequately monitor the dangerous area. * **Inclination and Height:** Check and adjust the inclination and height of the sensors to ensure they are appropriately set. Update the configuration report with any changes. * **Restart Delay:** Review and adjust the restart delay settings in the Inxpect Safety application (Settings > Sensors).

Inxpect LBK System Specifications

General

Category	Safety Equipment
Protection Degree	IP67
Operating Voltage	24 V DC
Response Time	< 100 ms
Configuration	Programmable via software
Safety Standards	ISO 13849-1 PL d
Field of View	110°
Outputs	2 safety outputs
Weight	500 g
Detection Range	Up to 4 m (configurable)